Viesmann VITODENS 200-W Operations Instructions download pdf (Page 20)

Adjusting the Room Temperature

Setting a Permanent Room Temperature (continued)

Selecting a time program (switching times)

For central heating, up to four changes can be made between normal and reduced

room temperature (four time phases). At the factory, time phase 1 is set for every

day from 06:00 to 22:00 hrs., ie. during that time, all rooms are heated to the

normal room temperature. You can set the time programs the same for every day or

for each day of the week individually.

When setting time programs, bear in mind that your heating system requires some

time to heat the rooms to the required temperature.

Forasequenceofstepstodeleteatimephase,(seepage21).

Steps f or selecting a time program:

Central heating time prog.

1-7

Central heating time prog.

Press the following keys:

1. ur for “Htg. time program”.

If “Select htg. circuit” is

displayed and “1r“ flas hes:

H Select the heating circuit

with ⊕ / ⊝,towhichthe

central heating should apply.

H Confirm twice with

H “ur” again for the

“Heating time program”.

2. ⊕/⊝ until “1-7” is displayed, if you

want to set up identical time

phases for every day.

Or..

3. ⊕/⊝ until “Mo”, “Tu” etc. is

displayed, if you want to set up

different time phases for the

day displayed.

to confirm; “Htg. timer 1”

will then be displayed.

to confirm; “Htg. cycle 1 On”

will then be displayed.

6. ⊕/⊝ for the heating phase starting

point.

to confirm; “Htg. cycle 1 Off”

will then be displayed.

8. ⊕/⊝ for the heating phase end point.

to confirm; “Htg. cycle 2 On”

will then be displayed.

10. Proceed for adjusting the start and

end of heating phases 2 to 4 as

described under steps 6 to 8.

Note:

Ifyouwanttoterminatethetime

programming early, press “ur“again

and confirm with

Note:

If different time phases are set for

individual days and you want to return

to identical time phases for every day,

press

when “1-7” is displayed. All

time phases are returned to their original

condition.

Note:

Press

ifyouwanttoskipatime

phase.

5369 299 v1.0 b

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Comments to this Manuals

No comments

Viesmann VITODENS 200-W Operations Instructions Page 20

Comments to this Manuals